Abrasive metal strips one-sided for finishing and polishing dental restorations ADACO Ackermann KG. Diamond Coated, medium thickness of 50 microns, length of 14 cm and a width of 4, 6 or 8 mm. Strips are perfectly suited for manual preparation of the interdental space hardly accessible with other instruments. Single use only.

Packaging: 12 pcs.

Adaco® Steel separating strips are applied in dental surgery as well as in dental laboratory, for the manual creation of
inlays and adamantine in the interdental spaces.

The Steel separating strip is carefully introduced in the interdental space with a light oscillating move. Thereby the grinded side of the Steel separating strip has to point at the interdental area, which the dentist has to treat. For the bilateral treatment of the interdental areas double-sided Steel separating strips are available. By the use of highly
abrasive Steel separating strips (coarse grit) it is necessary to mind not to remove too much adamantine. At the finishing less abrasive Steel separating strips (fine grit) are to be used.  

The Steel separating strips can be cleaned and disinfected before being applied at the patient.
Application in the oral cavity exclusively by the dentist or adequately skilled personnel.
The sharp edges of the steel separating strips retrieve a high risk of injury for the fingers.
During the treatment of the interdental area it is necessary to be careful not to injure the gingiva, because the edges of the Steel separating strips can easily cut into the tissue.
After the application of the Steel separating strips, the removed material in the oral cavity is to rinse out.
Damaged or kinked Steel separating strips are not to be used.

The Steel separating strips can be cleaned with a brush and water in adequate quality or in an ultrasonic bath.
Immediately after the cleaning the Steel separating strips have first to be rinsed with water in adequate quality and second to be dried promptly.